Specifications - Chicago Electric 69924 Owner's Manual

Specifications

Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Power Switch is in the off-position and unplug the tool from
its electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
ASSEMBLY
Installing the Side Handle
TO PREVENT SERIOUS INJURY:
Do not operate this tool with one hand only or without the Side Handle properly installed.
1. The Side Handle may be installed in one of two
positions, on either side of the Gear Housing.
Functions
Pad Connector (46)
hidden under Shroud
Item 69924
Electrical Rating
No Load Speed
Spindle Thread
Max. Accessory Diameter
Side Handle (30)
For technical questions, please call 1-800-444-3353.
120V~ / 60Hz / 5.7A
6,400 OPM
5/16" - 24 UNF
6" (150mm)
2. Screw the threaded end of the
Side Handle into the selected position.
Tighten securely before beginning work.
Switch (21)
Backing
Pad (47)
Speed
Control (20)
Page 9