Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 14h
REV 14h
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2006 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 95020
Summary of Contents for Chicago Electric 95020
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 95020... -
Page 3: Electrical Safety
A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Item 95020 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Power Tool Use And Care
Safety and Health) approved respirator both hands to resist starting torque. and ANSI approved safety goggles. Avoid skin exposure. Proper ventilation in the work area is required. Page 4 For technical questions, please call 1-888-866-5797. Item 95020... -
Page 5: Vibration Safety
If any abnormal vibration (such as tingling, numbness, vibration occurs, stop use immediately. and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Item 95020 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 National Electrical Code. Figure B: Outlets for 2-prong plug 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Figure B.) Page 6 For technical questions, please call 1-888-866-5797. Item 95020...
-
Page 7: Extension Cords
Underwriters Laboratories, Inc. set-up and/or use. WARNING marking Volts concerning Risk of Fire. Do not cover ventilation ducts. Alternating Current WARNING marking concerning Risk of Electric Shock. Maintain Power cord properly. Amperes Item 95020 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Specifications
Snap it in place into the in the Backing Pad for the Screws). rectangular shaft at the back of the Sander. Functions power Switch power cord Dust Bag clamp Sanding pad Page 8 For technical questions, please call 1-888-866-5797. Item 95020... - Page 9 Backing Pad (22). Item 95020 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Maintenance
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call 1-888-866-5797. Item 95020... -
Page 11: Parts List And Diagram
Cord Guard Bearing 9 x 26 x 8 Power Cord and Plug Dust Bag Label Balance Fan Screw ST 4.2 x 19 Bottom Board Sandpaper Hole Punch Screw M4 x 8 Item 95020 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Warranty
Record product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Limited 90 Day Warranty Harbor Freight Tools Co.