LevelOne WNC-0600USB User Manual page 21

N_One Wireless USB Adapter
Fragment
Threshold
RTS/CTS
Threshold
802.11n
Enable 802.11n
Network
Channel Width
Guard Interval
Extension
Channel
Antenna Selection
WPS Function Screen
The Wi-Fi Protected Setup (WPS) is to simplify the security setup and management of
Wi-Fi networks. WPS (Wi-Fi Protected Setup) allows consumers to protect their home
networks by using the push button configuration on the router, or entering an 8-digit
PIN code if there's no button.
You will see the WPS screen when you try to connect the wireless network with the
WPS function.
The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
802.11n wireless network connectivity
The value is set as "Auto"
This value is set as "Auto"
Auto selects the wireless channel. The value is set to "Auto"
It will auto select the most suitable channel.
The default value is set to "Auto".
Figure: WPS Function Screen
17