Table of Contents
Advertisement
N_One Wireless USB Adapter
Advanced Settings Screen
Once you have created a profile, as described above, the Advanced Settings tab will
be available on the Profile Manager screen.
Note: Advanced settings only available when 11b/g wireless mode has been selected.
Data - Advanced Settings Screen
Do not change
settings
Preamble
(2.4GHz)
Transmit Rate
Figure: Advanced Settings Screen
Enable this check box if you don't want to modify the settings
in this screen.
Normally, this should be left at "Auto".
The option "Short", "Long" preamble and header is intended
for special application and equipment.
Use this to manually set the speed, if desired. The default is
"Auto".
16
Advertisement
Table of Contents
Need help?
Do you have a question about the WNC-0600USB and is the answer not in the manual?
Questions and answers