NETGEAR GA 620 Reference Manual page 40

GA620/620T.Manual.R2 6/12/00
5. Click the Advanced tab.
A window showing the list of configurable properties (and default values)
is displayed:
6. Change the operating parameters as desired.
To change operating parameters listed under the Advanced tab, click on the
options listed under Property and then use the window under Value to change
the default or assigned value.
The following options should be displayed:
• Link Negotiation:
– When on (default), 802.3-1999 compliant Gigabit Ethernet link negotiation is
enabled. Model GA620 and Model GA620T Gigabit Ethernet Cards use link
negotiation by default.
– When off, link negotiation is disabled, only link signal detection is used. Use
this setting when connecting to Ethernet equipment that does not support link
windows 2000 driver software
1:55 PM Page 42
4-6