NETGEAR GA 620 Reference Manual page 16

GA620/620T.Manual.R2 6/12/00
As illustrated in Figure 2-2, the Model GA620T Gigabit Ethernet Card has an
RJ-45 connector port and four port LEDs.
10/100/1000
BASE-T
DATA
1000
100
10
9614EA
Figure 2-2. Front Panel of Model GA620T Gigabit Ethernet Card
The front panel of the Model GA620T has four LEDs: one for each port speed
option (10 Mbps, 100 Mbps, and 1000 Mbps), to indicate which link is active, and
one LED for data transfer status. Until the driver software is properly installed, all
four LEDs will remain lit when the server is powered on. Once the hardware and its
driver software have been properly installed on your system, the LEDs will indicate
as described in Table 2-3.
1:55 PM Page 17
hardware installation 2-5