Denon AVR-1803 Operating Instructions Manual page 55

23
I-I
Preparations:
Use the "Auto tuning" or "Manual tuning" operation to tune in the
station to be preset in the memory.
1
;.;Y"",t) Press the MEMoRY button.
I, I
t, 1
2
Press the SHIFT button and select the desired memory block
(A to E).
(Mm umti
Fkmote control umt)
NOTE: Please make sure the "AUDIO" position of the slide
switch on the remote control unit.
3
Press the PRESET UP or DOWN button to select the desired
preset channel (1 to 8).
4
MEMOKV
Press the MEMORY button again to
%
store the station in the preset
memory.
iRemote Control umt)
% To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset - 8 stations
(channels 1 to 8) in each of blocks A to E.
1 Watching the display, press the SHIFT button to select the
preset memory block.
(Mm unltj mxnote control umtl
NOTE: Please make sure the "AUDIO" position of the slide
switch on the remote control unit.
2
Watchrng the display, press the PRESET UP or DOWN button
to select the desired preset channel.
(Main umt) (Remote control unit)
55