Denon AVR-1803 Operating Instructions Manual page 45

1 Select the input source.
Playback with a digrtal input
0 Select an input source set to drgital (COAXIAL/OPTICAL)
(see page 24).
Example:
(Man unit) (Remote control unit)
@ Set the input mode to "AUTO" or DTS.
Select the Dolby/DTS Surround mode.
DOLBY i DTS
WRROUND 00tW,OTS
SURROUNO
% w
(Mm unit) iRemote control mt)
When performing this operatron from the main unit's panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logrc or DTS NEO:6.
Play a program source with the 001 , m mark.
DlGlTAL
D&L
l
The Dolby Digital indicator lights when
-;?I- Light
playing Dolby Dtgital sources.
l
The DTS indicator lights when playing
DTS sources.
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
SURROUND
w,Y
;Ll~rpO
KLlght e
(Mar unit) F&mote control unit1
l
Lights when the 6.1 Surround mode IS on.
2
1
9
5,6,7,8
1
-4, 5, 6,7,8
-5, 6, 7,8
-:, 6, 7,8
4
Set the surround parameter accordrng to the source.
First, press the SURROUND PARAMETER button.
SURROUND
NOTE:
PARAMETER
%
. Please make sure the "AUDIO"
posrtion of the slrde swatch on the
remote control unit.
memote Colltrol unit)
45