Table of Contents
Advertisement
Camera Gain Control Setting
■ GAIN Setting
[Command] gain GAIN
[Parameter] GAIN: 0 to 18 [dB] (1 step)
[Process]
Sets the gain.
<Example> Setting the gain to 18 dB
gain 18<CR>
camera gain complete<CR>
■ Current GAIN Setting
[Command] gain
[Process]
Displays the current gain value.
■ Help of the GAIN Setting
[Command] gain - -help
[Process]
Displays the help of the GAIN Setting
command.
Camera BINNING Settings
■ BINNING Settings
[Command] binning VALUE
[Parameter] VALUE: 0 to 3
0: Horizontal = OFF, Vertical = OFF
1: Horizontal = OFF, Vertical = ON
2: Horizontal = ON, Vertical = OFF
3: Horizontal = ON, Vertical = ON
[Process]
Sets the binning.
<Example> Setting both the Horizontal and
Vertical to OFF
binning 0<CR>
camera binning complete<CR>
■ Current BINNING Setting
[Command] binning
[Process]
Displays the current binning setting.
■ Help of the BINNING Setting
[Command] binning - -help
[Process]
Displays the help of the BINNING
Setting command.
Camera Partial Scan Settings
■ Partial Scan Settings
[Command] -h HORIZONTAL H-START H-WID
-v VERTICAL V-START V-HEI
[Parameter] HORIZONTAL: off, on
H-START: 0 to 7 (Valid when
Horizontal is set to on.)
H-WIDth: 0 to 7 (Valid when
Horizontal is set to on.)
VERTICAL: off, on
External Control Commands
V-START: 0 to 31 (Valid when
Veritical is set to on.)
V-HEIght: 0 to 31 (Valid when
Veritical is set to on.)
[Process]
Sets the partial scan.
<Example> Setting the partial scan.
partial -h on 2 4 -v on 5 20<CR>
camera partial complete<CR>
Note
When setting the Partial Scan Setting to ON, input
both the start-point and the end-point at one time.
■ Current Partial Scan Setting
[Command] partial
[Process]
Displays the current partial scan
setting.
■ Help of the Partial Scan Setting
[Command] partial - -help
[Process]
Displays the help of the Partial Scan
Setting command.
Version Information Request
■ Version Information Request
[Command] version
[Process]
Displays the model name and software
version.
Status Request
■ Status Request
[Command] status
[Process]
Displays the following items.
• Model Name
• Hardware Version
• Software Version
• Hostname
• IP Address
• MAC Address
• Serial Baud Rate
• Serial number
Help Request
■ Help Request
[Command] help
28
Advertisement
Table of Contents
