Table of Contents
Advertisement
Camera Administrator: Pedestal Level
Setting
■ Pedestal Level Setting
[Command] pedestal LVL
[Parameter] LeVeL: 0 to 255 (1step)
[Process]
Sets the pedestal level.
<Example> Setting the pedestal level to 128
pedestal 128<CR>
camera pedestal complete<CR>
■ Auto Pedestal Level Settings
[Command] pedestal AUTO or pedestal AUTO
X Y
[Parameter] AUTO: auto
X: x-coordinate of the area to be
adjusted
Y: x-coordinate of the area to be
adjusted
* When the X and Y parameters are
not input, the center ordinate 560,
448 is applied.
[Process]
Adjusts the pedestal level
automatically.
<Example> Adjusting the pedestal level
automatically using an area of
160 × 128
pedestal auto 560 448<CR>
camera pedestal complete<CR>
■ Current Pedestal Level Setting
[Command] pedestal
[Process]
Displays the current pedestal level.
■ Help of the Pedestal Level Setting
[Command] pedestal - -help
[Process]
Displays the help of the Pedestal Level
Setting command.
Camera Shutter: Shutter Mode Setting
■ Shutter Mode Setting
[Command] shutter -m MODE
or
shutter soft
[Parameter] MODE: monitor, trigger
[Process]
Sets the shutter mode and generates a
software trigger.
<Example> • Setting the shutter mode to monitor
mode
shutter -m monitor<CR>
camera shutter mode complete<CR>
• Generating a software trigger
shutter soft<CR>
camera shutter mode complete<CR>
External Control Commands
Note
A software trigger function is valid only when the
shutter mode is set to trigger mode.
■ Current Shutter Mode Setting
[Command] shutter -m
[Process]
Displays the current shutter mode.
■ Help of the Shutter Mode Setting
[Command] shutter -m - -help
[Process]
Displays the help of the Shutter Mode
Setting command.
Camera Shutter: Shutter Speed Setting
■ Shutter Speed Settings
[Command] shutter -s SPD
[Parameter] SPeeD: 2, 1, 1/15(off), 1/30, 1/60,
1/100, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000, 1/25000,
1/50000, 1/100000(t-width) [sec]
[Process]
Sets the shutter speed.
<Example> Setting the shutter speed to 1/30 sec
shutter -s 1/30<CR>
camera shutter speed complete<CR>
■ Current Shutter Speed Setting
[Command] shutter -s
[Process]
Displays the current shutter speed.
Note
When the shutter speed is set to 1/15 sec, the
• When the shutter mode is set to "monitor"
shutter -s<CR>
shutter off<CR>
• When shutter mode is set to "trigger"
shutter -s<CR>
shutter 1/15<CR>
■ Help of the Shutter Speed Setting
[Command] shutter -s - -help
[Process]
Displays the help of the Shutter Speed
Setting command.
Camera Shutter: Trigger Polarity Setting
■ Trigger Polarity Setting
[Command] shutter -p POL
[Parameter] POLarity: posi, nega
[Process]
Sets the polarity of the external trigger
pulse.
<Example> Setting the trigger pulse to positive
shutter -p posi<CR>
camera shutter polarity
complete<CR>
26
Advertisement
Table of Contents
