Table of Contents
Advertisement
■ Help of the Date Setting
[Command] setup date - -help
[Process]
Displays the help of the Date Setting
command.
Note
You can set the DATE settings when NTP setting is
set to off.
When NTP setting is set to on, the following
messages are displayed.
setup date 06-01-2005<CR>
warning: NTP mode is currently set to
Time Settings
■ Time Settings
[Command] setup time TIME
[Parameter] TIME: HH:MM:SS
[Process]
Sets the time.
<Example> Setting the time to 15:00:00
setup time 15:00:00<CR>
setup save complete time<CR>
Note
Time Setting is available only when the NTP Setting
is set to OFF.
When the NTP Setting is set to ON, the following
message appears.
setup time 15:00:00<CR>
warning: NTP mode is currently set to
■ Current Time Setting
[Command] setup time
[Process]
Displays the current time.
■ Help of the Time Setting
[Command] setup date - -time
[Process]
Displays the help of the Time Setting
command.
Web Monitor Settings
■ Web Monitor Settings
[Command] setup web MON/RATE/SIZE/QUA
[Parameter] MONitor: on, off
frame RATE: 1 to 5 (1 step)
view SIZE: 320, 160
image QUAlity: 1 to 10 (1 step)
[Process]
Sets the Web monitor.
<Example> Example of the Web monitor settings
setup web on/2/320/5<CR>
setup web complete<CR>
on; please turn it off to
manually set the date.<CR>
on; please turn it off to
manually set the time.<CR>
External Control Commands
■ Current Web Monitor Setting
[Command] setup web
[Process]
Displays the current web monitor
setting.
■ Help of the Web Monitor Setting
[Command] setup web - -help
[Process]
Displays the help of the Web Monitor
Setting command.
Camera Administrator: CDS Gain Settings
■ CDS Gain Settings
[Command] cds GAIN
[Parameter] GAIN: 0 to 63 (1step)
[Process]
Sets the CDS gain manually.
<Example> Example of the CDS gain setting
cds 63<CR>
camera cds complete<CR>
■ Auto CDS Gain Settings
[Command] cds AUTO
or
cds AUTO X Y
[Parameter] AUTO: auto
X: x-coordinate of the area to be
adjusted
Y: x-coordinate of the area to be
adjusted
*When the X and Y parameters are not
input, the center ordinate 560, 448 is
applied.
[Process]
Sets the CDS gain automatically.
<Example> Adjusting the CDS gain automatically
using an area of 160 × 128
cds auto 560 448<CR>
camera cds complete<CR>
■ Current CDS Gain Setting
[Command] cds
[Process]
Displays the current CDS gain setting.
■ Help of the CDS Gain Setting
[Command] cds gain - -help
[Process]
Displays the help of the CDS Gain
Setting command.
25
Advertisement
Table of Contents
