Sony MSW-A2000 Operation Manual page 79

Example of list display
The following figure shows how the list is organized.
Shot mark number of current cursor
position / total number of stored shot
marks
Separator
between read-in
groups of shot
NO.
marks
----------------------------
*011
Cursor (current
012
shot mark position)
013
----------------------------
014
015
Position in list
016
017
Shot mark type
R: recording start mark
S1: shot mark 1
S2: shot mark 2
V: virtual shot mark
P: post mark
#: memo mark
Selecting a shot mark
Turn the MULTI CONTROL knob to align the asterisk
cursor with the desired shot mark.
Entering virtual shot marks
When the REC/ERASE indicator is off, hold down the
ENTRY button and press the MARK button.
Z
MARK button
SHOT MARKER
(011/180)
TIME CODE
S1 10:04:05:11
R 10:05:35:24
V 10:07:05:02
R 10:08:35:04
S2 10:09:05:11
R 10:10:35:24
#R 10:10:36:00
Time code
ENTRY button
A virtual shot mark appears on the monitor as "V-
MARK xxx" (xxx is the number). This is not written to
the tape.
After entering a virtual shot mark, if you change the
cassette or power the unit off, it appears in the list as
the first shot mark of the next group read in.
Adding a memo mark (#)
Select the shot mark to which you wish to add the
memo mark, then press the F1 (MEMO) button.
Repeat this operation to remove a memo mark.
Selecting the types of shot mark to be
read in the list
For each of the types of shot mark (recording start
mark, shot mark 1, shot mark 2, and post mark) you
can specify whether it is read in.
In item G02 of the shot mark operation menu, set the
required types to "ON".
For details of the menu, see page 6-2.
You can also use the following procedure.
1
With the shot mark list displayed, press the F5
(SETING) button.
You can now select the shot mark types.
The function menu display changes as follows.
SHT
MRK PREV NEXT OFF
2
Press the F1 (PREV) or F2 (NEXT) button to
select a shot mark type.
3
Press the F4 (ON) or F3 (OFF) button to switch
between ON (displayed) and OFF (not displayed).
4
To return to the shot mark list, press the F6 (EXIT)
button.
Deleting a shot mark from the list
To delete a shot mark or the shot mark list, you can use
the F2 (SELECT) button instead of the MARK button,
and the F3 (DELETE) button instead of the DELETE
button.
Chapter 6 Shot Mark Function
ON EXIT
6-5