Sony MSW-A2000 Operation Manual page 40

3-4 Superimposed Character Information
2 Time code reader drop frame mark (for 525-line
mode only)
".": Indicates drop frame mode
":": Indicates non-drop-frame mode
3 Time code generator drop frame mark (for 525-
line mode only)
".": Indicates drop frame mode (factory preset)
":": Indicates non-drop-frame mode
4 VITC field mark
" " (blank): Fields 1 and 3 (for 525/60 mode) or
fields 1, 3, 5 and 7 (for 625/50 mode)
" * ": Fields 2 and 4 (for 525/60 mode) or fields 2, 4,
6 and 8 (for 625/50 mode)
5 Recorder/player selection
The indication changes as follows, according to the
state of the RECORDER/PLAYER buttons on the
control panel.
No display: Neither the RECORDER or PLAYER
button is lit.
P: The PLAYER button is lit.
R: The RECORDER button is lit.
6 Operation mode
The field is divided into three blocks, A, B and C.
• Block A displays the operation mode.
• Block B displays the servo lock status or tape speed.
• Block C displays a x mark to indicate an edit section
during automatic editing, or the section between the
IN and OUT points in auto feed playback.
A
3-10
Chapter 3 Preparations
Display
Block A
SPD
FEED
A-FEED
A-FEED
TAPE UNTHREAD
STANDBY OFF
T.RELEASE
STOP
F.FWD
REW
PREROLL
PLAY
PLAY
PLAY
REC
REC
EDIT
EDIT
JOG
JOG
JOG
SHUTTLE
VAR
AUTO EDIT
PREVIEW
REVIEW
B C
DMC
D-PREV
D-EDIT
DMC-SPD
PLY-SPD
a) Initial speed settings or stored speed settings
Operation mode
Block B
(speed) Feed playback speed setting
(+1.00 or +2.00 (BKMW-105
installed))
(speed) During feed playback (speed
display same as during setting)
During auto feed playback, or
cue up
(speed) During auto feed playback, or
feed playback (speed display
same as during setting)
Cassette is not loaded.
Standby off mode
Tape tension released
Stop mode
Fast forward mode
Rewind mode
Preroll mode
Playback mode (servo
unlocked)
LOCK Playback mode (servo locked)
Variation Capstan override mode (see
from normal
page 4-9)
speed (%)
Record mode (servo unocked)
LOCK Record mode (servo locked)
Edit mode (servo unlocked)
LOCK Edit mode (servo locked)
STILL A still picture in jog mode
FWD Jog mode in forward direction
REV Jog mode in reverse direction
(Speed) Shuttle mode
(Speed) Variable speed mode
Automatic editing mode
Preview mode
Review mode
(Speed) a) DMC playback mode
(Speed) DMC editing preview mode
a)
(Speed) a) DMC editing mode
(Speed) DMC initial speed setting
Variation Tape speed override mode
from normal (when "TSO" is selected in
speed setup menu item 111)