Sony MSW-A2000 Operation Manual page 112

9-4 Items in the Extended Setup Menu
Menu items in the range 100 to 199, relating to the control panels (Continued)
Item number Item name
118
KEY INHIBIT SWITCH
EFFECTIVE AREA
Sub-item
1 REMOTE
SELECT
2 AUDIO/F-KEY
3 MODE CONTROL Select which switch and button operations can be carried out from the lower
119 VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL
120 CTL LOCK IN VAR/SHTL
121 DT MODE
125 AUTO REWIND
130 TIMER DISPLAY
DIMMER CONTROL
131 AUDIO REC VOLUME
9-10
Chapter 9 Setup Menus
Settings
Select which switches and buttons can be operated when the KEY INHIBIT
switch on the switch panel is set to ON. The following sub-items control different
sets of switches and buttons independently.
Select whether the REMOTE 1(9P) and 2(50P) buttons in the upper control panel
are enabled.
DIS : Disabled
ENA: Enabled
Select whether the audio signal selection buttons and F1 to F6 buttons in the
lower control panel are enabled.
DIS : Disabled
ENA: Enabled
control panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons other than the audio signal selection buttons and
F1 to F6 buttons are disabled.
EDIT: All switches and buttons for editing operations other than the audio signal
selection buttons and F1 to F6 buttons are disabled.
ENA: All switches and buttons other than the audio signal selection buttons and
F1 to F6 buttons are enabled.
Select the playback speed range when carrying out playback in variable speed
mode from the control panel of this unit.
OFF : For MPEG IMX and analog tapes, from –1 to +3 times normal speed; for
Digital Betacam tapes, from –1 to +3 times normal speed; for Betacam SX
tapes, –1 to +2 times normal speed.
ON: For MPEG IMX, Betacam SX, Digital Betacam tapes, and analog tapes, from
0 to 1 times normal speed.
Select whether the tape transport should be phase-locked to the CTL signal
during playback in variable speed or shuttle mode.
OFF : Not phase-locked.
ON: Phase-locked at the following speeds: –1, –0.5, 0.5, 1.0 and 2.0 times
normal.
Select field or frame mode for variable speed playback.
FIELD : Always field playback
FRAME: Frame playback in the noiseless playback speed range; otherwise field
playback.
Frame playback provides higher-density still pictures than field playback.
Note
For analog Betacam playback, field playback is always used. For digital Betacam
playback, the frame playback is valid only in the forward direction.
Select whether to rewind the tape automatically when recording or playback
reaches the end of a tape.
DIS: Do not rewind the tape automatically.
ENA : Rewind the tape automatically.
Set the brightness of the time data/menu display panel.
0 to 7 : Set in this range. 0 is the brightest, and 7 the dimmest.
Select whether each of the audio REC controls on the lower control panel is
effective to control the audio recording level on each channel or the CH8/ALL CH
control alone functions as a master control to control the audio recording level on
all channels together.
EACH : Each REC control is effective to control each channel.
ALL: The CH8/ALL CH control alone functions as a master control.
When "ALL" is selected, the ALL CH indicator to the right of the CH8/ALL CH
control lights up.
(Continued)