NEC Aspire Feature Handbook page 39

To store a Caller ID
number in a One-
Touch key (Cont'd):
To call a number
stored in temporary
memory:
OneT = Store in One-Touch key
ABBc = Store in Common Abbreviated Dial
bin
ABBg = Store in Group Abbreviated Dial bin
4. Press the ONET Soft Key.
5. Press the One-Touch key in which the
number is to be stored or dial 1-9, 0.
If you press HOLD, the next avail-
able One-Touch key will be used.
If all One-Touch keys are used, the
display shows "TABLE IS FULL".
6. .
7. Enter the name to be associated with the
stored number.
For information on entering names,
refer to the Name Storing feature.
Names can be up to 12 digits long.
8. .
9. to hang up
1. Press
LIST Soft Key and CID.
The last addition to the list is displayed.
2. Press the ARROW DOWN Soft Key to
scroll through the list of numbers in
memory.
3. Press the DEL Soft Key to delete the
entry and scroll to the next entry.
The Call History key will remain on
as long as entries remain in memory.
For i-Series phones, press CHECK +
9 to delete all call entries.
4. To place a call back to a number in the
temporary memory list, with the number
to be dialed displayed, press a line, loop
or CALL key.
Caller ID
(Call History) or press the
33