Selecting The Video Signal Type - JVC DD-8 Instructions Manual

Preparation (continued)
■ CAUTION
• Connect the main unit directly to a TV (or a mon-
itor) without routing through a video cassette
recorder (VCR). Otherwise picture distortion
may occur during playback. (Routing the con-
nection through a VCR, however, does not affect
the audio quality.)
VCR
Main unit
Direct connection
• Connecting the main unit to a VCR-built-in-TV
may also cause picture distortion during play-
back.
13
Do not turn on the power until you complete the connection.
TV
(or monitor)

Selecting the video signal type

To view an image on the TV screen, select the
video signal type correctly according to the TV
after connecting the main unit to the TV.
1
Turn on the main unit. (Refer to
"Connecting the power cable" on
page 16 and "Turning on the main
unit" on page 17.)
2
Hold down [SCAN MODE] for 2 or
more seconds.
• The current video signal type flashes.
Example: