Connecting A Tv - JVC DD-8 Instructions Manual

Connecting a TV

Connecting a TV with the [AV]
terminal
TV
To a SCART terminal
SCART cable (not supplied)
Connecting a TV with the
[COMPONENT VIDEO OUT] terminals
TV
To component
terminals
Component video cable (not supplied)
Connecting a TV with the [HDMI]
terminal (not available for DD-1)
DD-8 and DD-3 can output uncompressed digital
video signals to a TV compatible with HDMI (High
Definition Multimedia Interface).
Main unit
(rear view)
NOTE
• When using an HDMI cable to connect a TV to
the main unit, select "HDMI" for the monitor out
type. (Refer to page 14.)
• DD-8 and DD-3 support up to HDMI version 1.0.
The HDMI video signal type can be checked with
the "HDMI" indicator in the display window.
(Refer to "Selecting the video signal type" on
Main unit
page 13. )
(rear view)
• If the picture is distorted while an HDMI TV is
connected, turn off the main unit and turn it on
again.
• A TV compatible with HDCP (High-Bandwidth
Digital Content Protection) can also be con-
nected to the [HDMI] terminal, so that the
uncompressed HD video signal type can be out-
put as well.
TV
To an HDMI terminal
HDMI cable (not supplied)
Main unit
(rear view)
12