Table of Contents
Advertisement
No
Component
1
Port Selection
Pushbuttons
2
Port LEDs
3
Console Ports (Audio)
4
USB 2.0 Peripheral Port
Description
Press a pushbutton for longer than two seconds to bring the KVM, USB,
and audio focus to the computer attached to its corresponding port.
The Port LEDs are located below the Port Selection Pushbuttons. The
upper one (Orange) are the KVM Port LEDs; the lower ones (Green) are
the USB LEDs:
KVM Lights DIM ORANGE to indicate that the computer attached to
the port is (On Line). Changes to BRIGHT ORANGE to indicate that
the computer attached that port has KVM focus (Selected). Flashes to
indicate that the computer attached to its port is in Auto Scan mode.
USB Lights GREEN to indicate that there is a USB connection to the
computer attached to the port. Changes to BRIGHT GREEN to indi-
cate that the computer attached has access to the USB peripherals.
Connections for your microphone and 2.1 speakers
Connection for a USB peripheral device ( printer, scanner, etc.)
9
Advertisement
Table of Contents
