Setting Whether To Accept Remote Control Operations - Roland R-09HR Owner's Manual

R-09HR configuration settings

Setting whether to accept remote control operations

(Remote Control)
Sets whether the R-09HR will receive the infrared data when the remote control is used.
fig.inputsetting-e.eps_80
1.
Select "Remote Control" from the <Menu
Screen>.
Use the [PLAY Button
"Remote Control," then press the [REC] Button.
fig.inputsetting-e.eps_80
2.
Set remote control reception to on or off.
Use the [PREV button
the File Name value.
Setting
When finished with the settings, press the [MENU button] to return
to the previous screens, in order.
108
] and [STOP Button
] and [NEXT button
Disable
Enable
] to select
Move the
cursor
up or down
] to change
Move the
cursor
up or down
Enter