Remote Switch - Roland CHORUS ECHO RE-501 Owner's Manual

®O
@ INPUT LEVEL INDICATOR
Set input level so normai reading is OdB, with
occasional peaks at +2dB
@ UNBALANCED INPUT Jack
For guitar, keyboard, microphone, ete
@ VOLUME Control
Controls input level from UNBALANCED INPUT
o
@ INPUT LEVEL SELECTOR Switch
For level matching.
Example settings:
Micro-
phone:
~60d8m;
Guitar: —25dBm;
Synthe-
sizer: OdBm; Mixer: OdBm or ~25dBm
@ DIRECT SIGNAL Switch
When OFF, only the effect signals will appear at
the outputs. Use this mode in effect foops such
as with mixer SEND/RETURN jacks. When ON,
the direct signal will be mixed with the effect
outputs.
© CHORUS indicator
Lights when the chorus effect is ON.
@® CHORUS ON/OFF Button
Depress for ON.
@ ECHO Indicator
Lights when the echo effect is ON.
® ECHO ON/OFF Button
Depress for ON
@ SONS (Sound-on-sound} EFFECT
ON/OFF Button
Depress for ON
® ECHO MODE SELECTOR Switch
ECHO 1, 2, and 3 are single slap echo modes;
ECHO 4, 5, and 6 are multipie slap echo modes.
@ ECHO/S ON S VOLUME Control
Controls the level of the echo and sound-on-
sound effects without affecting the direct sound
(when used)
@ SINGLE DELAY Switch
@ ECHO/S ONS INTENSITY Control
Controls the number of echo and sound-on-
sound repetitions.
At about "7" or "8° ("B=
3 o'clock}, self oscillation occurs. Single delays
can be produced at SINGLE DELAY.
@,®, ®. ®, ® CANCEL REMOTE SWITCH
Jacks.
® OUTPUT LEVEL SELECTOR Switch
For level matching of the UNBALANCED OUT-
PUTS @ @. Example of use: Microphone
amplifier: — 50d8m; Guitar amplifier: — 25d8m
@ @ A and B OUTPUT Jacks (unbalanced)
When using only one amplifier, use the A OUT-
PUT @. Use both OUTPUTS ® @ with two
amplifiers for stereo effects.
When the A OUTPUT @ only is used, all effects
will appear at the A OUTPUT @.
@ REVERB VOLUME Control
Controls the ievel of the reverberation effect.
® BASS TONE Control
@ TREBLE TONE Control
Far tone control of the effects,
Leave controls
@ PILOT Lamp
@ POWER Switch
ABOUT THE INPUTS AND OUTPUTS.