Roland R-09HR Owner's Manual page 13

LIMITER/AGC (Auto Gain Control)
switch
This switch turns the LIMITER or AUTO GAIN
CONTROL on or off. Ordinarily, it can be
set to off.
Switching between LIMITER and AUTO
GAIN CONTROL is performed on the
<Menu Screen> (p. 106).
Turns the LIMITER or AUTO GAIN
ON
CONTROL ON.
Records input sounds without chang-
OFF
ing them.
PLUG-IN POWER switch
Slide this switch to the appropriate setting
when you've connected a plug-in powered
microphone to the [MIC Input Jack
ON
Plug-in powered microphone is used.
OFF Plug-in powered microphone is not used.
* When set to use plug-in powered microphones,
using a dynamic microphone or a battery-
powered microphone may cause damage.
LOW CUT switch
This switch turns LOW CUT on or off.
It is usually set to off.
Records while cutting the lower range
portion of the input signal. Turn on
when breath noise (the sound of
ON
breathing while recording a voice) or
wind noise (when recording outside)
may be a problem.
OFF Records without cutting the lower range.
MIC GAIN switch
This switch changes the sensitivity with
respect to the input from the microphone.
Lowers the microphone sensitivity.
L
Set to L when inputting loud sounds
(LOW)
such as band performances.
Increases the microphone sensitivity.
H
Set to H when inputting softer
(HIGH)
sounds such as meetings.
32
31
Bottom cover
When the cover is opened, the [USB
Terminal
are visible.
].
➜"Preparing the memory card" (p. 25)
Forcing the cover open may damage the unit.
USB terminal
This terminal is used to connect to a PC via
the included USB cable. Songs recorded on
the R-09HR can be transferred to the PC,
and WAV or MP3 files can be copied from
the PC to the R-09HR to be played.
➜"Preparing the memory card" (p. 25)
Since USB 2.0 (HI-SPEED USB) is supported, songs
can be transferred quickly.
Memory card slot
This slot accepts SD memory cards.
➜"SD Memory Card" (p. 28)
Names of things and what they do
33
] and [Memory Card Slot ]
13