Table of Contents
Advertisement
Video + IR mode
In the Video + IR Mode the meter can measure IR temperature, air temperature, humidity, dew-point
temperature, and wet bulb temperature, along with full use of the video camera capabilities. The IR
Maximum (MAX) Temperature, IR Minimum (MIN) Temperature, IR Differential (DIF) Temperature,
and the IR Average (AVG) Temperature can also be displayed. Press and hold trigger to measure
the temperature.
Capturing Still Images (Photographs)
In the Video + IR mode, press the
button to take a photograph. Press the
button again to
save the photo (the SAVE soft-key will appear above the up arrow button after the photograph is
taken). Press the ▼button to cancel the photo
.
Capturing Video
In the Video + IR mode, press the
button to enter the video capture mode and then press the
button again to begin recording video. Press the ESC button to exit. Use the ▼button to stop
the video.
VIR50-EU-EN v2.3 5/14
5
Advertisement
Table of Contents
Need help?
Do you have a question about the VIR50 and is the answer not in the manual?
Questions and answers