Table of Contents
Advertisement
Emissivity setting
Use the arrow buttons to highlight an emissivity setting and then press ENTER to choose it. Select
emissivity by description (concrete, glass, etc.) or select ε=0.94 to set the emissivity manually using
the arrow buttons. Press the ESC button to exit and save.
Alarm High
Use the ▲ and ▼ buttons enable or disable the alarm. If the high alarm is enabled, press the
ENTER button to adjust its value; use the ▲ and ▼ buttons to adjust the value. Press the ENTER
button to conform and then press the ESC button to exit and save.
VIR50-EU-EN v2.3 5/14
14
Advertisement
Table of Contents
Need help?
Do you have a question about the VIR50 and is the answer not in the manual?