KYMCO 50 Owner's Manual page 21

CONTROLS & FEATURES
4 4 4 4 4
5 5 5 5 5
6 6 6 6 6 7 7 7 7 7
Changing from odometer display
to trip-meter display:
Press and hold the Adjustment
Button 4 4 4 4 4 for two seconds to
switch between "odometer" and
"trip-meter" display.
Resetting the Service Reminder:
[The Service Reminder will flash to remind
you to change the engine oil - DO NOT
reset until the oil change is complete]
Press and hold the Adjustment
Button 5 5 5 5 5 for five seconds to ac-
cess the service reminder mode.
While in service reminder mode,
press and hold the Mode Button
6 6 6 6 6 and the Adjustment Button
7 7 7 7 7 at the same time for two sec-
onds to reset the reminder.
To return to the odometer display,
press and hold the Adjustment
Button 7 7 7 7 7 for two seconds.
Trip-meter reset:
While in the trip meter display,
press and hold the Mode Button
8 8 8 8 8 and the Adjustment Button
9 9 9 9 9 at the same time for two sec-
onds to reset the trip-meter.
8 8 8 8 8 9 9 9 9 9
Adjusting the clock time:
While in the odometer mode, press
and hold the Mode Button AT AT AT AT AT and
the Adjustment Button AK AK AK AK AK at the
same time for two seconds in the
Odometer Mode until the clock's
hour display begins to flash.
Then press the Adjutment Button
AT AT AT AT AT
AK AK AK AK AK
to change the hour setting.
Press the Mode Button until the
clock's minute display begins to
flash and use the Adjustment But-
ton to change the minute setting.
Press the Mode Button and the
Adjustment Button again simul-
taneously to exit the clock adjust-
ment mode.
19