CONTROLS & FEATURES
Rear shock absorbers
You can adjust the spring preload of your scooter's shock
absorbers to match the load it will be carrying.
1. Insert the rod tool from the tool kit into the preload collar 1
on each shock absorber and rotate the collar to increase or
decrease the spring preload.
2. There are three steps on the spring preload collar. The cen-
ter step "medium" is the standard setting. The longer step
"hard", and the shorter step "soft", are optional settings based
upon your load and riding preference.
When adjusting the spring preload, rotate each shock
absorber's collar to the same setting.
Passenger foot rest
Your People S scooter is equipped with fold-down foot rests
2 for use when you are carrying a passenger.
1 1 1 1 1
Riding with a passenger will change the handling char-
acteristics of your scooter. Allow for extra braking dis-
tance and use extra care when riding in traffic.
Be sure you and your passenger should always wear
approved and properly fitting motorcycle helmets. You
and your passenger should also wear eye protection
and other protective apparel when you ride.
2 2 2 2 2