Franklin LDS-1990 User Manual page 9

USB Port
MMC/SD
Slot
USB Port: Plug the cable into this port to connect your device to your PC and to
recharge your device using an external power source.
Headphone Jack: The headphone jack is designed for 3.5 mm, 35 ohm impedance
stereo headphones. Caution: Monophonic headphones will not work with this unit.
Audio Player Buttons: The buttons, located on the left side of the device, control
the audio fi les stored on your device, as well as the volume of the speaker or
headphones.
MMC/SD Slot: Insert MMC/SD here. Slide the MMC/SD into the slot with the
contacts facing the back of the device. Push gently until it clicks into place. To
remove an MMC/SD from the slot, put your thumb on the MMC/SD and push it in
slightly. You hear a click and the MMC/SD pops out. Slide it out of the slot.
Understanding Your Device
8
Headphone
Jack
Audio
Player
Buttons