Table of Contents
Advertisement
Two minute rule
The machine may be tipped backward or on
its side to facilitate access for cleaning or
service, but no longer than 2 minutes.
If the machine is held in this position for too
long, the engine can be damaged by gasoline
draining into the crankcase. Should this
happen, perform an extra oil change on the
engine. Remove the spark plug and turn the
engine over a few revolutions with the starter
handle before starting the engine again.
Use protective glasses when
cleaning and washing.
Cleaning and washing
Regular cleaning and washing will increase
the machineís lifespan. Make it a habit to
clean the machine directly after use, before
the dirt sticks.
Check before rinsing that the fuel filler cap is
properly in place to avoid getting water in the
tank.
Do not spray water on the engine, avoid using
a high pressure washer or steam cleaner.
Lubricate the machine after cleaning. This is
particularly important if the machine is to be
stored.
Once cutting blade is clean apply light coating
of machine oil to prevent rust.
36-
English
MAINTENANCE
Advertisement
Table of Contents
