Table of Contents
Advertisement
Operating on hills
WARNING!
DO NOT operate on hills
exceeding 25% grade to
prevent machine from rolling
over.
•
Operate the machine cutting down rather
than across hills. You will achieve even
cutting depth, and enhance stability.
•
Avoid hill side turns. Back up hills in
reverse gear, then cut, going down.
Transport
•
Push the blade engagement lever down
to raise the blade.
•
Select the desired gear (low gear or
reverse).
•
Pull the throttle while maintaining a firm
grip on the handlebar.
•
Load into truck or trailer by driving up
ramps in low gear. DO NOT LIFT! This
machine is not intended to be lifted by
hand.
Brake
•
To set parking brake step on lever 'A'.
•
To release brake pull out lever 'B'.
OPERATION
A
B
29
English-
Advertisement
Table of Contents
