Maintenance; Maintenance Schedule - Husqvarna SC18A Operator's Manual

Sod cutter
Hide thumbs Also See for SC18A:
Table of Contents

Advertisement

Maintenance Schedule

l

Maintenance

Check the engine oil level
1)
Change engine oil
Check the air filter
2)
Clean the air filter
Replace air filter cartridge
Clean sludge reservoir for fuel system
Check and clean the spark plug
Replace the spark plug
Check engine switch function
Check idle speed
Check and adjust play in valves
4)
Clean fuel tank
Check, replace fuel lines as necessary
Check throttle and cable
Check blade
Check decals and warning signs
Check wear and tension on the belt
Check the chassis, bolts and set screws
Clean & oil pivot points
Oil & adjust chains
Check belt tension
Checkengine RPM (3000 RPM)
1)
First change after 20 hours.
3)
4)
Before each use.
WARNING!
No service operations may be performed on the engine or unit unless:
The engine is stopped.
The ignition cable has been removed from the spark plug.
The machine is securely parked where it will not tip or begin rolling.
30-
English
MAINTENANCE
3)
3)
4)
4,5)
3)
3)
3)
2)
In dusty conditions maintenance is required at shorter intervals.
Performed by authorized service workshop.
Daily
Weekly/
10
1/25
5)
Performed every second year.
Maintenance interval
in months/hours
3/50
6/100
12/300

Advertisement

Table of Contents
loading

Table of Contents