Operation; Starting The Engine - Husqvarna SC18A Operator's Manual

OPERATION

Starting the engine

Check that all daily maintenance as
described in the maintenance schedule has
been performed. Check that there is sufficient
fuel in the tank.
Fuel valve
1
Open the fuel valve. Place the lever all the
way to the right.
8011-182
1. Fuel Valve
Choke control
When starting the engine warm, the lever
should be in the right position; see the
illustration.
When starting the engine cold or partially
warm, place the lever completely or partly to
the left.
1
Move the lever back to the right once the
engine starts. When the engine is cold, it may
be best to move the lever back in several
8011-183
stages. Find the position where the engine
1. Choke Control
runs smoothly.
Gear Shift Lever
Set the gear shift to the neutral position.
shift handle
On/off switch on the engine
Turn the engine switch to the ON position.
8011-071
27
English-