Table of Contents
Advertisement
Translated Electrical Safety and Emission Information
Standards: This product meets the following standards.
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or the FCC can void your right to
operate this equipment.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
40
U.S. Federal Communications Commission
Canadian Department of Communications
RFI Emission
1
WARNING: In a domestic environment this product may cause radio interference in
2
which case the user may be required to take adequate measures.
3
Immunity
Electrical Safety
4
SAFETY
ELECTRICAL NOTICES
5
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or disconnecting the
LAN cables.
LIGHTNING DANGER
6
DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING
ACTIVITY.
CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-ENERGIZE
7
EQUIPMENT, disconnect the power cord.
ELECTRICAL - TYPE CLASS 1 EQUIPMENT
8
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly
wired earth ground socket outlet. An improperly wired socket outlet could place
hazardous voltages on accessible metal parts.
9
PLUGGABLE EQUIPMENT: The socket outlet shall be installed near the equipment
and shall be easily accessible.
CAUTION: Air vents must not be blocked and must have free access to the room
10
ambient air for cooling.
OPERATING TEMPERATURE: This product is designed for a maximum ambient
11
temperature of 40° degrees C.
ALL COUNTRIES: Install product in accordance with local and National Electrical
12
Codes.
FCC Class A, EN55022 Class A,
VCCI Class A, C-TICK
EN55024
EN60950 (TUV), UL60950 (
UL
c
), CE
us
Advertisement
Table of Contents
