Mitsubishi LCD1855NX-BK Service Manual page 15

8) Select PRESET EXIT command and Enter.
DIST. ADJ COLOR ADJ
MENU Move : Arrow or Space
3-4. Adjustment for EDID
Use this procedure only when there is some problem on EDID data.
1) Connect the D-sub cable.(For Analog EDID)
2) Select EEPROM
DIST. ADJ COLOR ADJ
MENU Move : Arrow or Space
3) Connect the DVI to D-sub cable.(For Digital EDID)
4) Select EEPROM
DIST. ADJ COLOR ADJ
MENU Move : Arrow or Space
<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>
COMMAND
PRESET START
PRESET EXIT
MENU Select : Enter
EDID<A> WR command and Enter.
<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>
COMMAND
MENU Select : Enter
EDID<D> WR command and Enter.
<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>
COMMAND
MENU Select : Enter
EDIT EEPROM QUIT
Quit : ESC
EDIT EEPROM QUIT
ALL Init.
EDID(A) WR
EDID(D) WR
EDID Read
EEPROM Read
Quit : ESC
EDIT EEPROM QUIT
ALL Init.
EDID(A) WR
EDID(D) WR
EDID Read
EEPROM Read
Quit : ESC