Mitsubishi LCD1855NX-BK Service Manual page 13

3. Adjustment
3-1. Initialization and Aging
Prior to adjustment of this model, more than 30 minutes of aging shall be carried out.
1) Display any pattern at any Mode.
2) Run adjustment program for LN801H on the IBM compatible PC.
DIST. ADJ
MENU Move : Arrow or Space
3) Select EEPROM
DIST. ADJ
MENU Move : Arrow or Space
4) This will make all data to default state and make aging mode.
5) Remove signal cable from the monitor.
<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>
COLOR ADJ COMMAND
ALL INIT command and Enter.
<< LCD IIC ADJUST. PROGRAM :LCD185~1. DAT >>
COLOR ADJ COMMAND
MENU Select : Enter
EDIT EEPROM QUIT
MENU Select : Enter
EDIT EEPROM QUIT
ALL Init.
EDID(A) WR
EDID(D) WR
EDID Read
EEPROM Read
Quit : ESC