Maintenance; Technical Data - A&D UB-511 Instruction Manual

Wrist digital blood pressure monitor
Hide thumbs Also See for UB-511:
Table of Contents

Advertisement

Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you
cannot fix the problem using the troubleshooting instructions, request service from your dealer or from the A&D
service group. The A&D service group will provide technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life. However it is generally recommended to have
the monitor inspected every 2 years, to ensure proper functioning and accuracy. Please contact either your
authorized dealer or A&D for maintenance.
Type
UB-511
Measurement
Oscillometric measurement
method
Measurement
Pressure: 20 – 280 mmHg
Pulse:
40 – 180 beats / minute
range
Measurement
Pressure: ±3 mmHg
accuracy
Pulse:
±5 %
Power supply
2 x 1.5V alkaline batteries (LR03 or AAA)
Approx. 400 measurements, when AAA Alkaline
Number of
batteries are used, with pressure value of 170
measurements
mmHg at room temperature of 23°C
Wrist
13.5 – 21.5 cm
circumference
Internally powerd ME equipment
Classification
Continuous operation mode
Note: Specifications are subject to change for improvement without prior notice.
EMC table information is listed on our website: http://www.aandd.jp/products/manual/medical/emc_en.pdf

Maintenance

Technical Data

Clinical test
Applied part
Useful life
EMC
Operating
conditions
Transport/stor
age conditions
Dimensions
Weight
English 15
According to ANSI / AAMI SP-10 1992
Cuff Type BF
Device: 5 years (when used six times a day)
IEC 60601-1-2: 2007
+10°C to +40°C / 15%RH to 85 %RH
800hPa to 1060hPa
-10°C to +60°C / 15%RH to 85 %RH
Approx. 63 [W] x 56 [H] x 21 [D] mm
Approx. 82 g, excepting batteries

Advertisement

Table of Contents
loading

Table of Contents