Goldair Wonder Chief FES150 Operating Instructions Manual page 6

Setting up your Electric Slicer
EXAMPLE USING SLICER BLADE
(FOLLOW SAME STEPS FOR GRATER BLADE, FRENCH
FRY BLADE, ICE SHAVER BLADE)
Read these instructions carefully before use and in
conjunction with Components section earlier in this
manual
1. Slice collection cup into container.
2. Place Slicer Blade on to Plate Frame, aligning hole in
Slicer blade with prong on Plate Frame
3. Place Plate Frame with Slicer Blade onto Step of
Container. Make sure that the Lever on Plate Frame
turns up and is pointing towards rear of unit..
4. Place Cover onto Container. Position Groove of Cover
over the Lever on the Plate Frame.
5. Connect the Power/Main unit to the Cover. Position
Dents of underside of Power/Main unit onto the Convex
points of the Cover.
6. Insert Large Food Pusher into Large Food Chute. Make
sure that the Ribs are located on the top.
7. Insert Medium Food Pusher into Large Food Pusher.
8. Insert Small Food Pusher into Medium Food Pusher.
9. Unit is ready for operation.
PLEASE READ THE
REST OF THIS
MANUAL BEFORE
USING YOUR
ELECTRIC SLICER.
THERE ARE
FURTHER, USEFUL
INSTRUCTIONS
REGARDING
OPERATION AND
SELECTION OF
BLADES, INSERTS
AND CHUTES.