Dryer Exhaust To Right, Left Or Bottom Cabinet - Kenmore 363.71542 Use & Care Manual

DO DO DO DO DO
Elbow highly
recommended
DON'T DON'T DON'T DON'T DON'T
Do not use
excessive
exhaust
length
BEFORE PERFORMING THIS EXHAUST INSTAL-
LATION, BE SURE TO DISCONNECT THE AP-
PLIANCE FROM ITS ELECTRICAL SUPPLY. PRO-
TECT YOUR HANDS AND ARMS FROM SHARP
EDGES WHEN WORKING INSIDE THE CABI-
NET. BE SURE TO WEAR GLOVES.
• Rotate elbow sections so that the opening points to the side
to which you want to vent. Preassemble 4" elbow with 4"
duct. Use only 4" UL approved rigid metal for ducting in-
Do not place
side the dryer.
appliance on
• Connect duct assembly to the internal elbow.
flexible
exhaust
Be sure not to pull or damage the electrical wires inside
Do not crush
the dryer when inserting the duct.
flexible
exhaust
against wall
• Apply duct tape as shown on the joint between the dryer
internal duct and the straight duct pipe.
9. Dryer exhaust to right, left or bottom
W W W W W ARNING ARNING ARNING ARNING
ARNING
For downward venting, rotate elbow
sections so that elbow points downward
W W W W W ARNING ARNING ARNING ARNING ARNING
Internal duct joints must be se-
cured with tape, otherwise they
may separate and cause a
safety hazard.
W W W W W ARNING ARNING ARNING ARNING
ARNING
27 27 27 27 27