Table of Contents
Advertisement
Page 18
Clamp
Shield
Shield (2x)
I/O connector
(internal)
7. Make sure the clamp is in place and tighten the screws.
•
The shield and the clamp surface shall be in full contact with each other so that the multi-
connector cable is grounded.
•
Make sure all surfaces and contacts are clean and free from scrap shield material.
AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide
1
9
8
3
6 5
7
2
Power connector
(DC output)
Ethernet connector
(internal)
4
Ethernet connector
(internal)
Advertisement
Table of Contents
