Denon AVR-1683 Operating Instructions Manual page 11

------------------------
I
1
1
Video camara
1 Connecting a Video game equipment 1
l
Connect the Video game equipment's output jacks to thus
unrt's V. AUX INPUT jacks.
1 Connecting a Video camera equipment 1
l
Connect the wdeo camera equipment's output jacks to thus
unit's V. AUX INPUT jacks.
.x The V. AUX terminal is covered with a cap. Remove this
cap rn order to usa the termrnal. (See page 4 for
rnstructions on removing the cap.)
l
When marking connections, also refer to the operating instructions of the other components.
l
A note on the S input jacks
The input selectors for the S Inputs and pin jack inputs work in conjunctron with each other.
l
Precaution when using S-jacks
Thus unit's S-jacks (input and output) and video pin jacks (input and output) have Independent circuit structures, so that video signals input from
the S-jacks are only output from the S-jack outputs and video srgnals input from the pin jacks are only output from the pin jack outputs.
When connecting this unrt with equrpment that is equrpped wrth S-jacks, keep the above point rn mind and make connections according to the
equipment's
instruction manuals
DVD plaver, VDP etc
Monrtor TV
0 c
2:
1 Connecting a DVD player or video disc player WDPI 1
DVDIVDP
nz
5 ::
l
Connect the DVD player's or vrdeo disc player's S-
,<
Video output jack to the S-VIDEO DVD/VDP IN jack
usrng an S-Video connectron cord
1 Connecting a monitor TV 1
MONITOR OUT
l
Connect the TV's or DBS tuner's S vrdeo input
(S-VIDEO INPUT) to the m MONITOR
OUT jack using a S jack connection cord.
TV or satellite broadcast tuner
l
Connect the TV's or DBS tuner's S
L VIDEO OUT
video output jack (S-VIDEO OUTPUT)
to the jm TV/DBS IN jack usrng
an S jack connection cord.
Connecting the video decks 1
l
Connect the vrdeo deck's S output jack (S-OUT) to the m
VCR IN jack and the wdeo deck's S input jack (S-IN) to the
-1 VCR OUT jack usrng S jack connection cords.
+:s .
"~,a z a". a"~.,.
z :
,I .>
~ ",E& $'z'
: VIDEO IN
6tb.3 S? \A-,< . . . :, s *
Connect the components' audio inputs and outputs as described on page 10.
, 2