Denon AVR-1683 Operating Instructions Manual page 33

Hide thumbs Also See for AVR-1683:
Table of Contents

Advertisement

1
Set the external input (EXT.
IN) mode.
Press the EXT. IN to switch
the external input.
(Man mti
(Remote control urutJ
Once this is selected, the input signals connected to the FL
(front left), FR (front rrght), C (center), SL (surround left), and
SR (surround right) channels of the EXT. IN jacks are output
directly to the front (left and right), center, surround (left and
right) speaker systems wrthout passing through the surround
circuitry.
In addition, the signal Input to the SW (subwoofer) jack is
output to the PRE OUT SUBWOOFER jack.
2
Cancelling the external input mode
To cancel the external Input (EXT. IN) setting, press the INPUT
MODE (AUTO, PCM, DTS) or ANALOG button to switch to
the desired input mode. (See page 30.)
IMam umtl
(Remote control unttl
l
When the input mode is set to the external input (EXT. IN), the play
mode (DIRECT, STEREO, DOLBY/DTS SURROUND, 5CH STEREO
or DSP SIMULATION) cannot be selected.
1
1
NOTES:
l
In play modes other than the external input mode, the signals
connected to EXT. IN jacks cannot be played. In addition, signals
cannot be output from channels not connected
to the input
jacks.
* The external input mode can be set for any input source. To
watch video while listening to sound, select the Input source to
which the video signal is connected, then set this mode.
1
Follow step 1 to 3 under "Playing the input source".
2
Start recording on the tape or video deck.
For instructions,
refer
to the
component's
operating
instructions,
Simultaneous
recording
The signals of the source selected with the function selector button are output simultaneously
to the CDR/TAPE and VCR REC OUT jacks. If
a total of two tape and/or video decks are connected and set to the recording mode, the same source can be recorded simultaneously
on
every decks.
NOTES:
l
The AUDIO IN's signal selected with the function selector button are output to the CDR/TAPE and VCR AUDIO OUT jacks
l
The DIGITAL IN's signal selected with the function selector button are output to the DIGITAL OUT (OPTICAL) jack.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-1603Avr-16031Avr-683

Table of Contents