Operating Instructions - Kenmore 408.91200310 Use & Care Manual

Heat Setting Control
THERMOSTAT
This heater is equipped with a thermostat to control the room temperature. To
increase room temperature, turn the dial clockwise.
POWER INDICATOR LIGHT
When the power cord is plugged into the power outlet, the power indicator
light will be illuminated.
BLUE LED LIGHT
When the power indicator is on but the temperature setting is lower than
ambient temperature, the Blue LED light will be illuminated.
RED LED LIGHT
When the power indicator is on but the temperature setting is higher than
ambient temperature, the Red LED light will be illuminated.
HEAT SETTING
Turn the dial towards symbol
dial completely to the right to get maximum heat setting. Use this heat setting
for faster warm-up of a room or during colder weather. Once the room is
comfortable, slowly rotate the thermostat dial counterclockwise until you hear a
click and the red LED light is switched to blue LED light. The thermostat will now
maintain the temperature by cycling the heater ON or OFF.
Turn the dial counterclockwise and completely to the symbol
to power heater OFF.

OPERATING INSTRUCTIONS

Maximum heat setting.
Minimum heat setting.
(Power off position)
to set higher room temperature, turn the
6