Adjusting Angle - Invacare Wheelchair Pronto M61 Operating And Maintenance Manual

Adjusting Angle

NOTE: For this procedure, refer to FIGURE 6.3.
WARNING
Pinch point may occur when adjusting
the arm angle position.
1. Lift up the armrest.
2. Loosen the jam nut.
3. Adjust the socket screw up or down to
the desired arm angle position.
4. Tighten the jam nut.
5. To determine the same angle for the
opposite armrest, count the exposed
threads after the jam nut has been
tightened.
Adjusting Height
NOTE: For this procedure, refer to FIGURE 6.4.
1. Remove the socket screw that secures the armrest to the seat frame assembly.
2. Adjust the armrest to one of four positions.
3. Reinstall the socket screw that secures the armrest to the seat frame assembly and
tighten securely.
Part No 1125085
Height
Adjustment
Holes
Lock Knob
FIGURE 6.4 Adjusting Height
37
6. Repeat STEPS 1‐5 for opposite armrest,
if necessary.
Arm Pad
Adjustment
Screw
Count Exposed Thread
Jam Nut
FIGURE 6.3 Adjusting Angle
Armrest
Arm Frame
Assembly
Pronto® M51™and M61™with SureStep®
SECTION 6—ARMS
Pinch Point