Invacare Wheelchair Pronto M61 Operating And Maintenance Manual page 24

Invacare wheelchair owner's operator and maintenance manual
Hide thumbs Also See for Wheelchair Pronto M61:
Table of Contents

Advertisement

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Inspect/Adjust Weekly
❑ Seat is secured to wheelchair frame.
❑ Seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑ Seat release latch is not worn and is functional. Replace if necessary.
❑ Inspect tires for flat spots and wear.
❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑ Ensure casters are free of debris.
Inspect/Adjust Monthly
❑ Ensure wheel mounting nuts are secure on drive wheels.
❑ Ensure no excessive side movement or binding occurs when drive wheels are lifted 
and spun when disengaged (freewheeling).
❑ Inspect caster assembly has proper tension when caster is spun. Caster should come 
to a gradual stop.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Inspect for any loose hardware on the wheelchair.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify 
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Ensure casters are free of debris.
Inspect/Adjust Periodically
❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Ensure arms are secure but easy to release and adjustment levers engage properly.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑ Ensure armrest pads sit flush against arm.
❑ Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑ Ensure seat release latch is not worn. Replace if necessary.
❑ Clean upholstery and armrests.
❑ Inspect charger AC power cord for damage. Replace if necessary.
❑ Ensure casters are free of debris.
❑ Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑ Check that all labels are present and legible. Replace if necessary.
Pronto® M51™and M61™with SureStep®
24
Part No 1125085

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pronto m51Pronto m61 with surestep

Table of Contents