Hard Drive - HP ProBook 4525s Maintenance And Service Manual

Hard drive

NOTE: The hard drive bracket is included in the Hard Drive Hardware Kit, spare part number
631412-001.
Description
750-GB, 5400-rpm, 12.7-mm
750-GB, 5400-rpm, 9.5-mm
640-GB, 5400-rpm, 9.5-mm
500-GB, 7200-rpm, 9.5-mm
320-GB, 7200-rpm, 9.5-mm
250-GB, 7200-rpm, 9.5-mm
Hard Drive Hardware Kit
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the Switch cover and keyboard (see
NOTE:
removing the hard drive.
6. Remove the palm rest (see
Remove the hard drive:
1. Position the computer right-side up with the front toward you.
2. Remove the two Phillips PM2.5×6.0 screws (1) and loosen the Phillips PM2.5×11.0 captive
screw (2) that secure the hard drive to the computer.
3. Grasp the mylar tab on the hard drive and slide the hard drive (3) to the right to disconnect it
from the system board.
72 Chapter 4 Removal and replacement procedures
Battery on page
It is not necessary to disconnect the keyboard cable from the system board when
Palm rest on page
48).
Switch cover and keyboard on page
69).
Spare part number
634250-001
652012-001
631160-001
634923-002
627731-002
616286-001
631412-001
49).