Loading A Saved Route - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual

7.10 Loading a saved route

1. Tap the following buttons:
2. Tap the route you wish to navigate.
3. In the very likely case when the start position of the saved route is different from the current
GPS position, you need to confirm whether you want to stop navigating from the current GPS
position to use the start point of the loaded route.
•
If you choose this option, automatic off-route recalculation will be disabled.
•
If you choose to keep the current GPS position as the start point, the route will be
recalculated starting from your current position.
4. The map appears. Tap
, ,
and start navigating.
Autogood products «130»
, .
41