NVE-M300P Navigation Module Owner's Manual
automatically with the same point. Now you can use it as a route point.
7.1.2 Entering an address or part of an address
If you know at least a part of the address, it is the quickest way to select the destination of the route.
Using the same screen, you can find an address by entering:
•
the exact address, including house number
•
the centre of a settlement
•
an intersection
•
the midpoint of a street
•
any of the above, starting the search with the postal code (page 34)
7.1.2.1 Entering an address
The parts of the address are shown on buttons. Start reading from the top, and if you want to change
any of them, tap the button.
1.
Tap the following buttons:
2.
By default, Alpine Navigation Software proposes the country and settlement where you are. If
needed, tap the button with the name of the country, and select a different one from the list.
3.
If needed, change the settlement:
•
To select the settlement from the list of recently used ones, tap the
•
To enter a new settlement:
1.
Tap the button with the name of the settlement, or if you have changed the
country/state, tap
2.
Start entering the settlement name on the keyboard.
3.
Get to the list of search results:
•
•
4.
Select the settlement from the list.
,
After entering a couple of characters, the names that match the string
appear in a list.
Tap
to open the list of results before it appears
automatically.
Autogood products «130»
,
.
.
button.
29