Locking The Set; Locking Your Set; Calling An External Correspondent From The Locked Set - Eads Telecom Connexity M720 User Manual

Locking the set

Locking the set
Use this function during absences, for example, so you can block outgoing calls from your set.
Important: before activating the locking of your set, you must first have customized your
password (refer to section on Customizing Your Set - Customizing Your Password).

Locking your set

If you want to lock your set.
Note: you can program this function directly,
or

Calling an external correspondent from the locked set

If you have locked your set but may at the time want to call an external correspondent without
unlocking your set.
or
Code secret
40
without picking up the
1 - Pick up the handset.
2 - Press the
A sound message is issued to confirm the programming.
3 - Hang up the handset.
Your set is now locked.
Note: you can still call an internal correspondent with the set
locked.
1 - Pick up the handset.
2 - Dial the external access code
A voice prompt requests you to enter your password*.
3 - Key in your password.
. If you make a mistake, you may start again.
As soon as the password is validated, you will be authorized
access to external calls.
You can dial your correspondent's number.
Note: at the end of the conversation, the set will return to
locked status.
* Depending on the features provided by your system operator
handset.
keys in succession.
(0).