Programming A Service; Modifying Programming; Cancelling Programming - Eads Telecom Connexity M720 User Manual

The programmable keys
Programming a service (continued)
Service sequence

Modifying programming

If you want to modify the programming of a key, you must save a new sequence.
The last programming registered is stored.
Canceling programming
If you want to delete the current programming.
22
3 - Enter the code
4 - Enter the service
Programming examples
Forwarding to selected extension - immediate ............
Forwarding to selected extension - on no answer ........
Forwarding to selected extension - on busy .................
Forwarding to voicemail syst. - immediate .................
Forwarding to voicemail syst. - on no answer .............
Forwarding to voicemail syst. - on busy.......................
Do not disturb ..............................................................
5 - Press the key to terminate.
The lamp associated with the
This way, you can enable or disable the forwarding or the
DND function by simply pressing the programmed key.
1 - Press the key (without picking up the handset).
2 - Press the key.
The lamp associated with the key flashes.
3 - Enter the code
This code is equivalent to canceling the programming.
4 - Press the key to terminate.
The lamp associated with the
.
sequence.
key goes out.
.
key goes out.
Service
seq. to enter
21 + Ext. no.
*
22 + Ext. no.
*
23 + Ext. no.
*
21 + Messg. no.
*
22 + Messg. no.
*
23 + Messg. no.
*
45
*