V-ZUG 28 Operating Instructions Manual page 34

7 Trouble-shooting and error messages
... a continuous acoustic signal is emitted,
appliance switches off
Possible cause
• A touch button or slider
was touched for longer
than 10 seconds.
• Object (e.g. pan, dish) on
the control panel.
• Food boiled over onto the
control panel.
... and flash alternately in the display
Possible cause
• The automatic safety
shut-off was triggered.
If a cooking zone has been running for longer without any settings
being changed, the appliance switches the cooking zone off
automatically. It is switched off irrespective of the power level set.
Power level
Safety shut-off after
hrs:mins
34
Solution
Remove object or food that has boiled over.
➤
The appliance can be used again as
➤
normal.
Solution
Switch the cooking zone back on again if
➤
required.
L 1 2 3
2:00 8:30 6:30 5:30 4:30 3:30 3:00 2:30 2:00 1:30
flashes in a display and the
4 5 6 7 8 9