Scanning Documents - Fujitsu ScanSnap fi-5110EOX Operator's Manual

If the scanner is not automatically turned on even when the paper chute cover
is opened, push the [POWER] button on the scanner.
HINT

■ Scanning documents

Operation
1. Make sure that the "ScanSnap Manager" icon is displayed on the task tray.
If the "ScanSnap Manager" icon is not displayed on the task tray, select [Pro-
grams] - [ScanSnap Manager] - [ScanSnap Manager] from the [Start] menu to
HINT
start up "ScanSnap Manager".
Generally, "ScanSnap Manager" is registered under "Startup" programs, so its
icon is displayed on the tasktray when Windows is started up. If it is not regis-
tered under "Startup" programs, select [All Programs] - [ScanSnap Manager] -
[Startup Register] from [Start] menu in order to register it.
2. Load the document onto the scanner.
Refer to "3.2 Scanning Different Document Types" (page 30) and "3.3 Loading Documents"
(page 32).
SCAN
3. Press
⇒
This starts the scanning.
As the default setting, documents are scanned with the "Duplex" mode when
you press the [SCAN] button. With "ScanSnap Manager", you can set the scan-
HINT
ner to scan documents using "Simplex" mode by pressing the [SCAN] button.
([SCAN] button).
ScanSnap fi-5110EOX Operator's Guide
3.1 Flow of Operations
25
3