6. Remove the pick roller from it's shaft.
Pull out the shaft from the pick roller while lifting up its tab.
If you push up the pick roller tab using your fingernail, it may heart or get
ATTENTION
chipped your fingernail. If you worry about that, you push up the pick roller tab
using a paper clip.
7. Attach the new pick roller to the shaft.
Insert the new pick roller aligning the protrusion with the slot on the pick roller.
Shaft
Tab
Pick roller
2
Pick roller
Protrusion
ScanSnap fi-5110EOX Operator's Guide
7.3 Replacing the Pick Roller
Shaft
1
7
107